Fertiliser recommendations are published as kilogrammes of nutrient per hectare. Fertiliser is sold as a product containing a percentage of that nutrient, and Ugandan gardens are measured in acres. Two conversions therefore sit between the recommendation and the order, and skipping either one is how a field gets roughly two and a half times what was intended, or two fifths of it.
The two conversions
Product per hectare = nutrient rate divided by the nutrient fraction in the product.
Product per acre = product per hectare multiplied by 0.405.
Do them in that order. Convert the nutrient to the product first, then the area, and the chance of mixing a unit drops sharply.
Worked through
A recommendation of 60 kg of nitrogen per hectare, to be met with urea.
Urea contains 46 per cent nitrogen, so the fraction is 0.46. 60 divided by 0.46 is 130.4, so about 130 kg of urea per hectare.
Converting to an acre: 130.4 multiplied by 0.405 is 52.8, so about 53 kg of urea per acre. At 50 kg a bag, that is just over one bag an acre.
The same 60 kg of nitrogen met with CAN at 26 per cent would be 60 divided by 0.26, which is 231 kg per hectare, or about 93 kg per acre. Same nutrient, same field, nearly twice the weight of product, because the product is weaker.
Nutrient content of common products
These are the grades as sold. Check the bag, because the same product name can be sold at more than one grade.
| Product | Nitrogen (N) | Phosphate (P2O5) | Potash (K2O) |
|---|---|---|---|
| Urea | 46% | - | - |
| CAN | 26% | - | - |
| DAP | 18% | 46% | - |
| NPK 17:17:17 | 17% | 17% | 17% |
| NPK 25:5:5 | 25% | 5% | 5% |
| Muriate of potash | - | - | 60% |
What each product is for, and when it is the wrong choice, is in NPK fertiliser explained, DAP fertiliser explained and the organic fertiliser guide.
A compound supplies more than one nutrient at once
This is where a calculation most often goes wrong on paper. If a recommendation asks for both nitrogen and phosphate and you apply DAP, the DAP is supplying both, and the nitrogen it carries must be subtracted before you work out the top dressing.
Say the recommendation is 60 kg N and 46 kg P2O5 per hectare. Meeting the phosphate with DAP at 46 per cent P2O5 needs 100 kg of DAP per hectare. That 100 kg of DAP also carries 18 kg of nitrogen. The nitrogen still owed is 60 minus 18, which is 42 kg, and that is what the urea calculation should be run on, not the original 60.
Splitting the application
A rate per acre is a total for the season, not a single dose. Nitrogen in particular is usually split, because urea applied all at once on a young crop is largely lost before the plant can use it. The timing by crop is in maize fertiliser application, bean fertiliser and the tomato fertiliser schedule.
Per plant, per hole, per acre
Applying by the capful at each station is practical, and it is also where the rate quietly drifts. Convert once and check it against the area total.
At 18,000 plants per acre and 53 kg of urea per acre, each plant gets 53,000 grammes divided by 18,000, which is about 2.9 grammes. If the measure you are using delivers five grammes, you will apply about 90 kg an acre, which is nearly twice the rate. Work out your population first using how to calculate plant population per acre, then weigh what your measure actually holds rather than assuming.
Before any of this, the soil
A calculated rate applied to ground whose problem is acidity, compaction or low organic matter is money poorly spent, and the arithmetic will be perfect. A recommendation is only meaningful against a known starting point: see soil testing before fertiliser application.
Frequently Asked Questions
How many bags of urea do I need per acre? It depends on the nitrogen rate being recommended. Divide the nitrogen rate per hectare by 0.46 to get kilogrammes of urea per hectare, multiply by 0.405 for an acre, then divide by 50 for bags. A recommendation of 60 kg N per hectare works out at about 53 kg, or just over one 50 kg bag, per acre.
Why is the rate given per hectare when I farm in acres? Because agronomic research and official recommendations are published in metric units, while land in Uganda is bought, rented and talked about in acres. One hectare is about 2.47 acres, so a rate applied per acre as though it were per hectare delivers roughly two and a half times too much. Convert once, write the acre figure on the recommendation, and work from that.
Do I subtract the nitrogen in DAP from my urea calculation? Yes. DAP is about 18 per cent nitrogen, so 100 kg of DAP supplies 18 kg of nitrogen as well as the phosphate you bought it for. Subtract that from the nitrogen target before working out the urea, or the crop receives more nitrogen than the recommendation intended.
Can I just apply a capful per plant? You can apply by station, but work out what the capful should weigh rather than assuming. Divide the per-acre rate in grammes by the plants per acre. At 53 kg an acre and 18,000 plants that is under three grammes per plant, which is a small measure, and most improvised ones deliver considerably more.
Is organic manure a substitute for this calculation? It is a substitute for some of the nutrient, but it is far more variable, so the same arithmetic cannot be run on an assumed percentage. Manure also does something fertiliser does not, which is feed the soil's structure and organic matter. The two are usually better together than either alone: see the organic fertiliser guide.
