Maize milling machines grind shelled grain into flour, and the ones that serve Ugandan villages are hammer mills rated at six to ten tonnes a day. The catch is that a mill is a service business with a catchment, not a piece of farm equipment. Surveyed mills in a comparable East African market said they could handle 30 to 40 bags a day and were measured doing three or four. Capacity is never the constraint. Customers are.
What a Maize Milling Machine Is, and Who It Serves
Ugandan maize milling splits into two tiers, and the FAO, WFP and IFAD study of the Ugandan maize chain names them the way the trade does. Medium sized millers, commonly called posho millers, run 6 to 10 tonnes a day and sell flour to urban and rural households, to retailers, and to institutions including schools. They sometimes hold grain on behalf of a client. Large millers buy grain from traders and agents and sell flour onward to urban retailers and traders.
Almost nobody buys a mill to grind their own maize. The arithmetic does not work: a household eating and selling a few tonnes a year cannot use a machine rated for that much in a day. The mill earns by serving other people's grain, which is why the whole page that follows is about a catchment rather than about a machine.
There is a piece of continental evidence that says this is the right instinct. Reviewing seven decades of farm mechanisation in Africa, the FAO and African Union Commission framework identifies grain milling with hammer mills as the one machinery category that was broadly successful, and gives the reason explicitly: the hire model worked, because a mill earns from many customers rather than from one farm. Tractors filled graveyards. Mills did not. That is a real distinction and it is worth knowing why.
Hammer Mills Against Plate and Roller Mills for Maize Flour
Three grinding principles, and the choice sets what you can sell.
For a village mill the honest answer is a hammer mill, and the interesting decision is not the grinding principle. It is whether you add a de huller in front of it.
Extraction Rate: the Milling Decision That Sets What You Sell
Extraction rate is the share of grain weight that leaves as flour. It is the most consequential number in a milling business and hardly anybody selling mills explains it.
The Ugandan chain study measured the split at village mills and put it at 100 kilograms of grain giving about 66 kilograms of flour and about 30 kilograms of bran. At the other end, the Kenyan Cereal Millers Association figures for medium to large industrial mills run at about 80 percent extraction for grade 1 flour and about 95 percent for grade 2, which is roughly two and a half kilograms of maize for two of flour at the tighter end. Those figures are not in conflict so much as describing different products, and reading them together gives the real band: somewhere between about two thirds and about 95 percent of the grain comes out as flour, and where you sit in that band depends entirely on how much bran and germ you take out.
| Product | Grain removed | Flour share | Bran left over |
|---|---|---|---|
| Whole meal | Nothing | Near 95 pc | Very little |
| Sifted meal | Bran, germ | About 80 pc | Moderate |
| Village measured | Bran, germ | About 66 pc | About 30 pc |
Read that table as a business decision rather than a technical one. Low extraction gives whiter flour that competes with a branded bag and fetches more per kilogram, and it leaves you a third of your intake as bran that you now have to move. High extraction gives the cheap whole meal that poorer households buy, wastes almost nothing, and leaves you nothing to sell on the side. Both are viable. What is not viable is choosing one by accident.
The Kenyan value chain research found this was precisely what separated the mills that did well from the ones that idled. Mills that invested in de hullers could produce sifted flour good enough to compete with the large milling sector on quality, and the ones that also bought and stored maize at harvest, then sold flour when local scarcity arrived, could offer a better product at a lower cost than their large competitors. They also sold in half kilogram packets, which large mills do not bother with and which matters where a customer cannot afford a two kilogram bag.
Maize Bran: the By Product, and the Risk Attached to It
At around 30 kilograms per 100 of grain, bran is not a scrap. In the Ugandan chain study's own product flow it goes to two destinations: animal feed and brewing. A mill that can reliably supply bran has a second revenue line and a standing relationship with every poultry and pig keeper within reach. That is genuinely valuable, and how maize bran works as a feed ingredient covers what it is worth in a ration.
Now the part the mill sellers leave out. Bran concentrates the outer layers of the kernel, which is where mould growth and contamination sit, and it is hygroscopic, so it picks up moisture faster than whole grain and goes musty in a corner of a mill house within days. Aflatoxin in Ugandan poultry feed made from maize bran is a documented problem rather than a theoretical one, and the food safety chain runs straight from a badly stored heap of bran to a flock that stops laying.
Two facts fix the limits of what you can do about it. Aflatoxin B1 is only completely broken down at around 150 degrees in a protein matrix, so no milling step and no drying step destroys it. And a survey of Kampala markets found aflatoxin in 40 percent of the analysed staple food samples, with the samples that had been held within safe storage moisture clearly less likely to be contaminated. The lever is moisture at intake and dryness in the store, not anything the machine does. Storing feed safely is the same discipline applied to the output side.
Power Is Usually the Binding Constraint on a Village Maize Mill
You can buy a mill. Turning it is the harder half.
World Bank figures put access to electricity in Uganda at about 55 percent of the population and about 45 percent of the rural population. That single pair of numbers decides more milling businesses than any machine specification. Where three phase power reaches, an electric motor is the cheaper prime mover per tonne milled, and Kenyan research recorded exactly that effect: the expansion of more efficient electric powered mills, alongside rising competition, drove the milling charge down. Where power does not reach, or reaches unreliably, the mill runs on a diesel engine, the fuel bill becomes the largest recurring cost, and every hour the machine sits idle still carries the standing cost of the asset.
A few practical consequences follow that no catalogue mentions. A diesel mill can be sited where the maize is, which is the whole logic of a village mill, but it must be fed enough volume to justify fuel and a repair habit. An electric mill is tied to a line, which means it is tied to a trading centre, which means it is competing with every other mill already on that line. And a three phase connection is a capital project in its own right with a lead time, not a detail you settle after the machine lands.
Before you fix on a size, ask what power you can actually get at the site you have in mind, then choose the machine. Doing it the other way round is how a mill ends up in a store room.
Catchment: Working Out Whether a Maize Mill Has Enough Customers
This is the section the ranking pages do not have, and it is the one that decides the outcome.
The only published measurement of what small mills actually do comes from a Kenyan maize value chain study that interviewed small scale mill owners directly. The mills reported being able to process 30 to 40 bags of maize a day. On average they were operating at about 10 percent of that, three to four bags a day. The reason the study gives is excessive local competition, and it gives the shape of it in one line: one small village may have three mills operating in close proximity to each other.
The failure mode is not a bad machine. It is a good machine with nobody queuing.
There is an honest upside in the Ugandan numbers too. The chain study's stage by stage accounting put income earned at the maize milling stage at about 153 UGX per kilogram against about 84 UGX per kilogram at primary production, with roughly 6,900 jobs attached to the milling stage. Per kilogram handled, the miller earns close to twice what the grower does. That is why mills keep being built. It is also why the village next to yours already has three.
Food Safety Inside a Small Maize Mill
The Ugandan chain study put milling on its list of critical loss points at 5 percent quantitative loss, and its account of why is uncomfortable reading for anyone planning to run one.
The losses were mainly spillage through broken parts on maize mills, and the study attributes the broken parts to proprietors failing or being reluctant to carry out regular service and maintenance. It then offers the reason: such losses do not directly affect the millers, because they are borne by the clients. A mill leaking flour and bran onto the floor is leaking someone else's grain, so nobody with the spanner has an incentive to stop it. If you are the farmer bringing the grain, that is your loss, and it is the argument for watching your own maize go through.
Two quality failures are worse than the spillage. The first is cross contamination: the study records qualitative losses when different quality products pass through the same machines without cleaning in between, so a mouldy load leaves its residue for the next customer. The second is specific and fixable, and it is worth naming because it is so common: to loosen the husk before milling, millers mix the grain with water on dirty concrete floors, which the study says predisposes the grain to contamination and results in contaminated flour. Wetting grain for de hulling is normal practice in dry milling. Doing it on a dirty floor is not.
Drying, Grain Quality and What Arrives at the Mill
A mill cannot improve grain. It can only pass on what it receives, finer.
That makes the miller the most demanding customer a Ugandan maize grower has, and the chain study captures the resulting frustration exactly: farmers try to maintain the quality the millers require, and good quality is not necessarily rewarded with a higher price. Both halves of that sentence are true and they are the reason quality improvement in Ugandan maize is so slow.
One technical limit is worth knowing if you dry grain destined for a mill. Research on maize drying in Wakiso District notes a recommended ceiling of 65 degrees for maize intended for flour milling, above which the high temperature affects the grain's chemical structure and degrades the quality. Grain scorched in a hurry mills badly. The grain dryers page covers what temperature control is actually available to a Ugandan farm, and grain moisture management covers measurement. Getting the grain off the cob without cracking it in the first place is the shelling machine's job.
Siting, Maintenance and the Cost of Standing Still
Three things a mill owner controls, and all three are about time rather than technology.
Siting first. A mill goes where the customers walk, and the Ugandan evidence is that the crop moves by head portage and bicycle. Being two kilometres closer than the next mill is a more durable advantage than being ten percent faster.
Maintenance second, and the Ugandan study has already shown what neglect costs, except that it costs the customer rather than the owner, which is exactly why it gets neglected. A mill with a reputation for clean, complete milling is competing on something a rival with a broken screen cannot copy cheaply. Spares are the practical form of this: hammers, screens, bearings and belts held locally rather than ordered when the machine stops. A maintenance routine is worth writing down before the first breakdown, not after.
Third, the standing cost of an idle machine. A mill running at three bags a day against a rated 30 is carrying nine tenths of its capital cost for nothing. Every route out of that runs through volume: more customers, an institution, a buying and selling line alongside the service, or bran sold reliably enough that a feed maker plans around you. Turning bran into feed yourself is the most common next step, and feed mixing machinery is what that needs.
Questions Ugandan Farmers Ask About Maize Milling Machines
What does a maize milling machine cost in Uganda? No reliable Ugandan price is published, and the listings that exist move with the exchange rate, the engine size and whether a de huller is included, so this page will not print a figure. Collect three written quotations on one specification, price the de huller as a separate line because it changes what you can sell, and get the cost of a three phase connection in writing before you assume electric power is cheaper. Current grain prices, which set what your milling service is worth to a customer, are on the maize price page.
How much should I charge for milling? The price is set by the mills already working near you, not by your costs, and the Kenyan evidence shows how hard that pressure can be: competition and the spread of electric mills pushed the charge down to between five and ten Kenyan shillings per two and a half kilogram tin. Note the unit, because it tells you something about the trade. Ask two local mills what they charge, and if the answer leaves you no margin at three or four bags a day, that is the finding, not a reason to ignore it.
Is a posho mill a profitable business? Sometimes, and the deciding variable is measurable before you spend anything. The only survey to publish actual throughput found small mills operating at about a tenth of their rated capacity, three to four bags a day against thirty to forty, because of local competition. Against that, income at the milling stage in Uganda works out at about 153 UGX per kilogram handled against about 84 at the farm. So the margin per kilogram is good and the volume is the risk. Count the mills within walking distance of your site before anything else, and use the break even calculation on the bags per day you honestly expect rather than the bags per day the machine can do.
Hammer mill or plate mill for maize? Hammer mill, for dry maize at volume. It is what Ugandan and Kenyan posho mills run, it tolerates variable grain, and worn hammers and screens are replaceable parts rather than a rebuild. A plate mill earns its place on wet or oily material. A roller mill is a different order of investment and belongs to branded sifted flour rather than a village service.
How much flour will I get from a bag of maize? Between about two thirds and about 95 percent of the grain weight, and you choose where in that band you sit. Ugandan village mills were measured at about 66 kilograms of flour and 30 kilograms of bran from 100 kilograms of grain, which is a de hulled, whiter product. Whole meal milling, where bran and germ go through with the kernel, gives far more flour and almost no bran. Expect around 5 percent to disappear as loss in a poorly maintained mill.
What do I do with the maize bran? Sell it as animal feed, or use it in your own rations, and keep it dry from the moment it leaves the machine. Bran is the outer part of the kernel and it takes up moisture quickly, so a heap in a corner of the mill house is a mould problem waiting. The feed pages cover what it is worth in a ration.
Can milling remove aflatoxin from contaminated maize? No. Aflatoxin B1 only fully breaks down at around 150 degrees in a protein matrix, and nothing in a mill gets anywhere near that. Sorting and cleaning before milling remove visibly mouldy kernels and reduce the load, which is worth doing, but contaminated grain makes contaminated flour and it concentrates in the bran. The only real control is grain that never got wet in storage.
Why do millers wet maize before milling, and is it safe? Wetting grain briefly softens the outer layers so the husk comes away during de hulling, which is normal practice in dry milling and is how a sifted flour gets made. What makes it unsafe is where it is done. The Ugandan chain study found millers mixing grain with water on dirty concrete floors, and says plainly that this predisposes the grain to contamination and results in contaminated flour. If you watch your maize being conditioned on a dirty surface, that is the moment to object.
How much maize is lost at the milling stage? About 5 percent in the Ugandan chain study, which lists milling among its critical loss points. The loss is mostly spillage through broken parts on mills that have not been serviced, and the study gives the reason nothing changes: the loss falls on the client rather than on the miller. If you bring your own grain, stand and watch it go through, because the missing flour is yours.
Should I mill my own maize instead of selling grain? It is a different business, not an extension of farming, and it needs customers rather than a crop. If what you want is a better price for the grain you already grow, storage and sale timing do more for less capital than a mill does, which is what the maize storage guide and the gap between farm gate and retail prices are about.
Comparing Maize Mill Suppliers and Local Milling Services
Start with the catchment and not the catalogue. Walk or ride the radius your customers would cover, count the mills already working in it, and ask two of them what they charge and how many bags they see on an ordinary day. That single afternoon tells you more than any specification sheet. If the answer still looks workable, get three written quotations on one specification and make each state the rated output with the grain moisture it was measured at, the prime mover and its power requirement, whether a de huller is included, which spares are held in the country, and who services the machine and how far away they are. Check the current maize price before you commit, since the value of milling to a customer is set by what their grain and flour are worth, and see the rest of the farm machinery guides for the equipment that usually pays for itself sooner on a smallholding.
